Alkylbenzoic and Alkyloxybenzoic Acid Blending for Expanding the Liquid Crystalline State and Improving Its Rheology.

Thermotropic mesogens typically exist as liquid crystals (LCs) in a narrow region of high temperatures, making lowering their melting point with the temperature expansion of the mesophase state an urgent task. Para-substituted benzoic acids can form LCs through noncovalent dimerization into homodimers via hydrogen bonds, whose strength and, consequently, the temperature region of the mesophase state can be potentially altered by creating asymmetric heterodimers from different acids. This work investigates equimolar blends of p-n-alkylbenzoic (kBA, where k is the number of carbon atoms in the alkyl radical) and p-n-alkyloxybenzoic (kOBA) acids by calorimetry and viscometry to establish their phase transitions and regions of mesophase existence. Non-symmetric dimerization of acids leads to the extension of the nematic state region towards low temperatures and the appearance of new monotropic and enantiotropic phase transitions in several cases. Moreover, the crystal-nematic and nematic-isotropic phase changes have a two-step character for some acid blends, suggesting the formation of symmetric and asymmetric associates from heterodimers. The mixing of 6BA and 8OBA most strongly extends the region of the nematic state towards low temperatures (from 95-114 °C and 108-147 °C for initial homodimers, respectively, to 57-133 °C for the resulting heterodimer), whereas the combination of 4OBA and 5OBA gives the most extended high-temperature nematic phase (up to 156 °C) and that of 6BA and 9OBA (or 12OBA) provides the existence of a smectic phase at the lowest temperatures (down to 51 °C).

Asphaltenes from Heavy Crude Oil as Ultraviolet Stabilizers against Polypropylene Aging.

The destruction of polymers under the influence of ultraviolet (UV) radiation is the cause of their aging and deterioration of strength properties. Asphaltenes are low-value waste products after the refining and deasphalting of heavy crude oil, which absorb UV radiation well. Asphaltenes require rational utilization, which suggests their use as UV stabilizing agents for polymers. In this work, asphaltenes were used to prevent UV aging of polypropylene (PP) by adding them in a mass fraction from 5% to 30% within an asphaltene/PP composite material. Rheometry, calorimetry, X-ray diffraction analysis, and tensile strength of PP films containing asphaltenes were performed before and after their intense UV irradiation for accelerated aging. Asphaltenes slightly reduce the viscosity, crystallinity, and mechanical strength of the initial PP due to their plasticizing effect. However, this deterioration in properties is more than compensated when studying UV-aged samples. Intense UV aging causes multiple catastrophic drops in the viscosity and strength of pure PP with the preservation of crystallinity due to the break of polymer chains and a decrease in molecular weight by approximately eight times. Asphaltenes suppress the destruction of PP, which is expressed in a significantly smaller decline in its viscosity and strength due to UV aging. The most optimal content of asphaltenes is 20%, which suppresses UV destruction by six times and best preserves the strength properties of PP.

Safety and immunogenicity of rAd26 and rAd5 vector-based heterologous prime-boost COVID-19 vaccine against SARS-CoV-2 in healthy adolescents: an open-label, non-randomized, multicenter, phase 1/2, dose-escalation study.

To protect young individuals against SARS-CoV-2 infection, we conducted an open-label, prospective, non-randomised dose-escalation Phase 1/2 clinical trial to evaluate the immunogenicity and safety of the prime-boost "Sputnik V" vaccine administered at 1/10 and 1/5 doses to adolescents aged 12-17 years. The study began with the vaccination of the older cohort (15-to-17-year-old participants) with the lower (1/10) dose of vaccine and then expanded to the whole group (12-to-17-year-old participants). Next, 1/5 dose was used according to the same scheme. Both doses were well tolerated by all age groups. No serious or severe adverse events were detected. Most of the solicited adverse reactions were mild. No significant differences in total frequencies of adverse events were registered between low and high doses in age-pooled groups (69.6% versus 66.7%). In contrast, the 1/5 dose induced significantly higher humoral and T cell-mediated immune responses than the 1/10 dose. The 1/5 vaccine dose elicited higher antigen-binding (both S and RBD-specific) as well as virus-neutralising antibody titres at the maximum of response (day 42), also resulting in a statistically significant difference at a distanced timepoint (day 180) compared to the 1/10 vaccine dose. Higher dose resulted in increased cross-neutralization of Delta and Omicron variants. Clinical Trial Registration: ClinicalTrials.gov, NCT04954092, LP-007632.

Epoxy Phase-Change Materials Based on Paraffin Wax Stabilized by Asphaltenes.

The usual problem of meltable phase-change agents is the instability in their form upon heating, which can be solved by placing them into a continuous polymer matrix. Epoxy resin is a suitable medium for dispersing molten agents, but it is necessary to make the obtained droplets stable during the curing of the formed phase-change material. This work shows that molten paraffin wax forms a Pickering emulsion in an epoxy medium and in the presence of asphaltenes extracted from heavy crude oil. Theoretical calculations revealed the complex equilibrium in the epoxy/wax/asphaltene triple system due to their low mutual solubility. Rheological studies showed the viscoplastic behavior of the obtained dispersions at 25 °C, which disappears upon the heating and melting of the paraffin phase. Wax and asphaltenes increased the viscosity of the epoxy medium during its curing but did not inhibit cross-linking or reduce the glass transition temperature of the cured polymer. As a result of curing, it is possible to obtain phase-change materials containing up to 45% paraffin wax that forms a dispersed phase with a size of 0.2-6.5 µm. The small size of dispersed wax can decrease its degree of crystallinity to 13-29% of its original value, reducing the efficiency of the phase-change material.

Constitutive inorganic pyrophosphatase as a reciprocal regulator of three inducible enzymes in Escherichia coli.

BACKGROUND: Previous studies have demonstrated the formation of stable complexes between inorganic pyrophosphatase (PPase) and three other Escherichia coli enzymes - cupin-type phosphoglucose isomerase (cPGI), class I fructose-1,6-bisphosphate aldolase (FbaB) and l-glutamate decarboxylase (GadA). METHODS: Here, we determined by activity measurements how complex formation between these enzymes affects their activities and oligomeric structure. RESULTS: cPGI activity was modulated by all partner proteins, but none was reciprocally affected by cPGI. PPase activity was down-regulated upon complex formation, whereas all other enzymes were up-regulated. For cPGI, the activation was partially counteracted by a shift in dimer ⇆ hexamer equilibrium to inactive hexamer. Complex stoichiometry appeared to be 1:1 in most cases, but FbaB formed both 1:1 and 1:2 complexes with both GadA and PPase, FbaB activation was only observed in the 1:2 complexes. FbaB and GadA induced functional asymmetry (negative kinetic cooperativity) in hexameric PPase, presumably by favoring partial dissociation to trimers. CONCLUSIONS: These four enzymes form all six possible binary complexes in vitro, resulting in modulated activity of at least one of the constituent enzymes. In five complexes, the effects on activity were unidirectional, and in one complex (FbaB⋅PPase), the effects were reciprocal. The effects of potential physiological significance include inhibition of PPase by FbaB and GadA and activation of FbaB and cPGI by PPase. Together, they provide a mechanism for feedback regulation of FbaB and GadA biosynthesis. GENERAL SIGNIFICANCE: These findings indicate the complexity of functionally significant interactions between cellular enzymes, which classical enzymology treats as individual entities, and demonstrate their moonlighting activities as regulators.

Cardiac tumours - a brief review.

This short review of cardiac tumours presents a case that clearly demonstrates the manifestation of embolic and cardiac symptoms of an intracardiac mass. Acute onset and rapid progression of a neoplastic process in the heart leading to arrhythmia, cardiac conduction disorders and heart failure combined with highly mobile fragments of tumour, which can cause emboli in cerebral vessels, are characteristic signs of an intracardiac mass. Early diagnosis and immediate treatment may improve the long-term prognosis, but overall the prognosis is poor. Cardiac tumours present to the cardiologist when the patient presents with cardiac symptoms, and the neurologist when there are cerebral symptoms. Most cardiac masses are not amenable to percutaneous biopsy; therefore, definitive diagnosis often awaits surgical excision.

Annotated expressed sequence tags (ESTs) from pre-smolt Atlantic salmon (Salmo salar) in a searchable data resource.

BACKGROUND: To identify as many different transcripts/genes in the Atlantic salmon genome as possible, it is crucial to acquire good cDNA libraries from different tissues and developmental stages, their relevant sequences (ESTs or full length sequences) and attempt to predict function. Such libraries allow identification of a large number of different transcripts and can provide valuable information on genes expressed in a particular tissue at a specific developmental stage. This data is important in constructing a microarray chip, identifying SNPs in coding regions, and for future identification of genes in the whole genome sequence. An important factor that determines the usefulness of generated data for biologists is efficient data access. Public searchable databases play a crucial role in providing such service. DESCRIPTION: Twenty-three Atlantic salmon cDNA libraries were constructed from 15 tissues, yielding nearly 155,000 clones. From these libraries 58,109 ESTs were generated, of which 57,212 were used for contig assembly. Following deletion of mitochondrial sequences 55,118 EST sequences were submitted to GenBank. In all, 20,019 unique sequences, consisting of 6,424 contigs and 13,595 singlets, were generated. The Norwegian Salmon Genome Project Database has been constructed and annotation performed by the annotation transfer approach. Annotation was successful for 50.3% (10,075) of the sequences and 6,113 sequences (30.5%) were annotated with Gene Ontology terms for molecular function, biological process and cellular component. CONCLUSION: We describe the construction of cDNA libraries from juvenile/pre-smolt Atlantic salmon (Salmo salar), EST sequencing, clustering, and annotation by assigning putative function to the transcripts. These sequences represents 97% of all sequences submitted to GenBank from the pre-smoltification stage. The data has been grouped into datasets according to its source and type of annotation. Various data query options are offered including searches on function assignments and Gene Ontology terms. Data delivery options include summaries for the datasets and their annotations, detailed self-explanatory annotations, and access to the original BLAST results and Gene Ontology annotation trees. Potential presence of a relatively high number of immune-related genes in the dataset was shown by annotation searches.

preAssemble: a tool for automatic sequencer trace data processing.

BACKGROUND: Trace or chromatogram files (raw data) are produced by automatic nucleic acid sequencing equipment or sequencers. Each file contains information which can be interpreted by specialised software to reveal the sequence (base calling). This is done by the sequencer proprietary software or publicly available programs. Depending on the size of a sequencing project the number of trace files can vary from just a few to thousands of files. Sequencing quality assessment on various criteria is important at the stage preceding clustering and contig assembly. Two major publicly available packages--Phred and Staden are used by preAssemble to perform sequence quality processing. RESULTS: The preAssemble pre-assembly sequence processing pipeline has been developed for small to large scale automatic processing of DNA sequencer chromatogram (trace) data. The Staden Package Pregap4 module and base-calling program Phred are utilized in the pipeline, which produces detailed and self-explanatory output that can be displayed with a web browser. preAssemble can be used successfully with very little previous experience, however options for parameter tuning are provided for advanced users. preAssemble runs under UNIX and LINUX operating systems. It is available for downloading and will run as stand-alone software. It can also be accessed on the Norwegian Salmon Genome Project web site where preAssemble jobs can be run on the project server. CONCLUSION: preAssemble is a tool allowing to perform quality assessment of sequences generated by automatic sequencing equipment. preAssemble is flexible since both interactive jobs on the preAssemble server and the stand alone downloadable version are available. Virtually no previous experience is necessary to run a default preAssemble job, on the other hand options for parameter tuning are provided. Consequently preAssemble can be used as efficiently for just several trace files as for large scale sequence processing.

A tetrapeptide-based method for polyproline II-type secondary structure prediction.

We describe a new method for polyproline II-type (PPII) secondary structure prediction based on tetrapeptide conformation properties using data obtained from all globular proteins in the Protein Data Bank (PDB). This is the first method for PPII prediction with a relatively high level of accuracy (approximately 60%). Our method uses only frequencies of different conformations among oligopeptides without any additional parameters. We also attempted to predict alpha-helices and beta-strands using the same approach. We find that the application of our method reveals interrelation between sequence and structure even for very short oligopeptides (tetrapeptides).